The modern all-mountain ripper
Ideal for all-conditions freeriding, freestyle and carving
On-Piste / All Mountain10/10
Freeride / Powder9/10
Freestyle / Park7/10
Environmental and social responsibility
Proud member of 1% For The Planet
Your purchase supports grassroots organizations. We donate 1% of every sale to environmental causes though our partnership with 1% For The Planet.
Sustainably sourced woodcores
All Jones woodcores are made with sustainably sourced wood. Every piece of wood we use in every board comes from a responsibly managed forest.
Wend Bio Wax
Jones boards are ready to shred straight out of the shop and are factory waxed with Wend natural wax, a plant blend and biodegradable wax that is also non-toxic.
Built with 100% solar power
As of May 2020, all Jones snowboards and splitboards are made with 100% solar power. Switching our snowboard and splitboard production to 100% solar made a 89% reduction in CO2 compared to non-solar powered production.
Bio Resin is a bio-based epoxy made with 27% plant-based carbon instead of petroleum-based carbon. The organic raw materials used to make bio-resin are co-products or waste products of plant-based industrial processes.
100% recycled ABS
Since 2014, all of our snowboards and splitboards have been built with recycled ABS sidewalls. We've used 847 miles of sidewalls since switching to recycled ABS.
3D Contour Base 3.0
Freeride focused 3D-base contours featuring an even balance of 7mm of spoon bevel in the nose and 7mm of spoon bevel in the tail. Spoon bevel starts at the rocker point.
1. Traction Tech 3.0
Traction Tech 3.0 features three bumps per edge (front binding, board center, back binding). The middle bump is slightly bigger than the outside bumps for better grip.
2. Progressive sidecut
At the far ends of the sidecut, the radius is incrementally increased as the edge reaches the contact point. Gradually increasing the sidecut radius towards the contact point delivers smoother turn initiation and exit as the edge tracks in and out of the snow with a less abrupt transition.
Tapered shape, 10 mm
The tapered shape sinks the tail in pow for better float and quicker turns.
How a board glides in powder, crust, corn or any snow more than an inch deep, is dictated by it’s front contact point and just past it. Next time you are in soft snow watch how much snow comes over the corner of the nose near the contact point. The billowing snow coming out from behind the tip means you are plowing through it which is obviously slowing you down. By adding a blunt nose you get the float benefits of a much longer nose without the ‘snow plow’ rounded tip and it’s extra swing weight. - Jeremy Jones
Directional Flex Pattern
Off set tip-to-tail flex pattern that is designed for directional freeride boards. The nose, center of board and tail are slightly different stiffnesses to help lift the nose, sink the tail and improve stability at speed.
Jones exclusive wood core profiling that offers a stable and playful board feel. The wood core is softer between the feet for easy turn initiation and stiffer in the nose and tail for stability riding through uneven terrain and landing airs.
A hybrid rocker/camber flex pattern defined by more tip rocker then tail rocker and camber between the bindings. The rockered tip floats the board’s nose and improves maneuverability while the camber underfoot provides edge hold and response. A slightly rockered tail maintains the power and stability of a traditional board but helps keep the tail catch-free initiating turns and landing switch.
"My experience is that most falls in freeriding start from the nose of the board – you either go over the bars in powder, the nose gets caught under a weird crust and tosses you, or you hit a hard tranny at the contact point of the tip and get bucked. Directional Rocker eliminates most of these falls." - Jeremy Jones